Description
Why buy a SEASOFT FLASHLIGHT POCKET™?
Once you own a SEASOFT Flashlight Pocket™ and find how:
1.effortless it is to use your flashlight.
2. easy it is to put it away.
3. you’ll never have to worry about losing your light.
4. you’ll easily be able to disconnect your light and hand it to a friend if needed.
5. you will truly never dive without a SEASOFT Fashlight Pocket again.
FEATURES
1. Tough CORDURA case with hard polycarbon plastic backing on all sides.
2. Custom manufactured Stainless Steel Retractor with High Tension Retractor Strength.
3. Side release buckle where Flashlight and Retractor Line meet for easy disconnect if needed.
4. Two different methods of attaching to webbing – 1. Webbing thru loop or 2. Double fold over VELCRO™
5. Once you have a SEASOFT FLASHLIGHT POCKET™ you will never dive without one again!
Always have a flashlight within easy reach with a SEASOFT Flashlight Pocket. Included is our CUSTOM manufactured stainless steel retractor with HIGH TENSION RETRACTOR STRENGTH. It will always hold your light. Hold the SEASOFT Flashlight Pocket upside down, your flashlight will NOT come out until you want it to.
Two models are now available:
1. Part #: 140-012 .75” to 1.5” fits the smaller aluminum flashlights of any length up to 12″.
2. Part #: 140-014 1.5” to 3” fits the SEASOFT RAYGUN Flashlight & lights like the UK SL3 & 4 & SL6.
Why should you buy this SEASOFT Flashlight Pocket?
Always have a flashlight within easy reach with a SEASOFT Flashlight Pocket.
Imagine, you reach down, pull your light out and it is attached to a stainless steel line which is attached to a retractor in the bottom of the pocket. You look in that coral cave or in the octopus den and then you re-holster your light as it is magically pulled right back into the pocket.
No need to look down or fumble around, it just is so easy and natural. You can NEVER lose your light!
Two models are now available:
1. Part #: 140-012 .75” to 1.5” fits our SEAGUN or lights like the INTOVA and other slender dive lights.
2. Part #: 140-014 1.5” to 3” fits the SEASOFT RAYGUN Flashlight & lights like the UK SL3, SL4 & SL6.
All SEASOFT Flashlight Pockets have a high-tension steel retractor mounted behind the pocket with stainless steel line. The line runs thru a grommet that connects to a quick release buckle with a stainless steel ring that then connects to your light. Most divers wear the SEASOFT Flashlight Pocket on the webbing that fits over the cummerbund of your BC, but it can be mounted anywhere.
It comes with 2” of overlapping Velcro or you can choose to wear webbing through the 2” fixed slot.
Instead of hanging a light from your BC or wearing a wrist lanyard why not choose the low profile, foolproof way to attach your light?
Get a SEASOFT Flashlight Pocket!
Reviews
There are no reviews yet.