Description
Customers naturally ask us how it is different than our SEAGLU Wetsuit Adhesive™.
SEAGLU-D Drysuit Adhesive:
1. Has a stronger bond.
2. Has a little bit less elasticity, maybe 15 to 20% less.
3. It sets up faster so you have less time to mess around but when it sets, it sets. You typically have 15 to 30 seconds.
4. If you are repairing a drysuit and this includes most bag or trilaminate suits it really works with a long-lasting strong bond.
5. Works well with latex seals but you only get one shot. Also, too much glue can damage the latex because of the strong solvents in SEAGLU-D but it works quick and seals extremely well.
Here is a short video about SEAGLU-D featuring Bruce Justinen, President of SEASOFT SCUBA
https://youtu.be/3cFfK9hD3iY
You can also find it in the video section of this website.
HINTS FOR USING SEASOFT’S SEAGLU™.
1. The fumes from SOLVENTS in SEAGLU-D™ or in the solvents needed to clean up are extremely toxic and can make you sick and can even cause your death. You MUST use a recommended ventilation mask for protection or work in an extremely well-ventilated area.
2. Clean up with “Laquer Thinner” or Toulene.
3. All glues are flammable, be extremely careful around flames and do not smoke while using SeaGLU-D™, have a large fire extinguisher ready if needed.
4. SeaGLU-D™ dries in minutes so it is wiser and more efficient to do small areas at a time.
5. If you are not sure how to do a repair then you will have much better results referring your repair to professionals.
6. When a repair starts going “sideways” on you the best thing to do is to STOP! Let the glue dry. Pack everything up. See the local professionals with experience.
7. Watch the tutorial: https://www.youtube.com/watch?v=4Z5I4_wLtlM
8. If the lid is not sealed TIGHTLY your SeaGLU-D™ will dry out and is not covered by any warranty!
Reviews
There are no reviews yet.